Muvus Ltd supply G80, G10 & G12 grade chain      slings and steel lifting components.
 

      Chain slings are for lifting heavy loads and are available in a

      G80 or G100 grades from WL. Can be in 1,2,3 or 4 leg

      versions with different types of hooks at the end.

​

       Available in 7mm up to 26mm chain and from WLL 1.5t up to

       WLL 19t. 
       (Please quote for availability and price)
 

• G100 grade is 25% higher capacity compared to traditional Grade 80 components.

• Chain slings are extremely durable and can be adjusted to suit your requirements, with a range of hooks available; including a safety hook, self-locking hook, swivel hook, or sling hook.

• Chain slings are used in the industrial industry, however, they can also be used for transportation and home use.

• Marking: CE mark, supplied with steel ID tag with individual ID number, WLL, material grade and size.

• Stamped with individual ID number and supplied with GA1 cert

• ​Standard: EN818-4

• Safety factor: 4:1

      The self-locking hook closes and locks itself when lifted,

      making it a safe lifting hook. The hook can be opened by

      pressing the pawl on the back of the hook. The latch can

      be replaced. 

       Available for 6 mm up to 22 mm chain and from WLL 1.4t up to           WLL 19t. 
       (Please quote for availability and price)

      G10 Range benefits:

• 25% higher capacity compared to traditional Grade 8 components

• All G100 components are powder painted in luminous red

• Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings

• The components meet EN 1677 part 1/2/3/4 +25% WLL

• Each forged component is crack detection tested, and samples are proof load tested.

• Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL

• Full traceability through a batch number

• Replacement spare parts available

• All components are chromium 6 free

• Certificate enclosed with each box of components

• The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4.

• Marking: According to standard, Model (SLC-6-10) + traceability code.

• Temperature range: -40°C up to +200°C without reduction in WLL

• Finish: Powder painted in luminous red

• Standard: EN 1677-3
  (+ 25% WLL)

• Safety factor: 4:1

• Grade: 10
  
  
  The Connecting Link C is a quick and cost-effective part forassembling chain slings. The locking spring is encapsulated in a protective steel bushing.
  Available for 6 mm up to 32 mm chain, and from WLL 1.4t up to WLL 40t.
  (Please quote for availability and price)
  
  G100 Range benefits:

• 25% higher capacity compared to traditional Grade 8 components

• All G100 components are powder painted in luminous red

• Multi-functional master links and components are included in the range to allow quick and cost-effective assembly of chain slings

• The components meet EN 1677 part 1/2/3/4 +25% WLL

• Each forged component is crack detection tested, and samples are proof load tested.

• Each component is type tested in the factory and fatigue rated to 20,000 cycles at 1.5 times the WLL

• Full traceability through a batch number

• Replacement spare parts available

• All components are chromium 6 free

• Certificate enclosed with each box of components

• The components may also be used with Grade 8 chain to EN 818-2. In such a case, the chain sling needs to be rated as Grade 8 in accordance with EN 818-4.

• Marking: According to standard, Model (C-6-10) + traceability code.

• Temperature range: -40°C up to +200°C without reduction in WLL

• Finish: Powder painted in luminous red

• Standard: EN 1677-1
  (+ 25% WLL)

• Safety factor: 4:1

• Grade: 10
  
  
  Eye grab hook is used for shortening chain legs of a sling. The grab hook is attached to the master link with the same connection link as the chain.

• Material: Steel

• Marking: CE-marked

• Temperature range: -40 - (+)200°C / 400°C = WLL 75%

• Finish: Painted, blue

• Warning: Not to be heat-treated

• Safety factor: 4:1

• Grade: 10 or 80
  
  
  Bow type shackle PBSB is a high quality shackle intended for use in demanding environments. It is supplied with a hexagon head safety bolt with nut and stainless steel cotter pin.
  
  The shackle comply to EN 13889 and meets the performance requirements of US Federal Specification RR-C-271 Type IVA Class 3, Grade A.
  
  Features:

• All bodies and bolts marked with batch number for traceability

• Larger sizes equipped with arrows to indicate 45 degrees to vertical

• Raised pad for dedicated and easy individual ID (3,25 t and up)

• The bow is forged in closed dies

• All parts are made from alloy steel being quenched and tempered

• All parts including bolts and nuts are hot dip galvanized for long life

• High quality hot dip galvanization process giving an exclusive mat grey finish

• Safety bolts and nuts are additionally painted in blue and red for quick and easy detection as original parts

• Retaining pins made from stainless steel

• Multilanguage user manuals

• Material: Forged alloy steel, supplied with safety bolt and nuts. Stainless steel retaining pins.

• Marking: According to standard, CE-marked, WLL, size, grade and batch number.

• Temperature range: -20°C up to +200°C

• Finish: All parts hot dip galvanized + head-bolt and nut additional powder painted.

• Standard: EN 13889

• Safety factor: 6:1

• Grade: 6
  
  
  JOKER sling hook, Grade 100
  
  Features:

• Web sling hook is designed to be used for webbing and round slings. Hook is slided to a belt or a sling.

• The hooks are color coded

• Material: Steel

• Marking: CE-marked

• Temperature range: -40 - (+)200°C / 400°C = WLL 75%

• Finish: Painted, color coded

• Warning: Not to be heat-treated

• Safety factor: 4:1

• Grade: 10